stream_socket_server

http://php.net/manual/zh/function.stream-socket-server.php

(PHP 5, PHP 7)

stream_socket_server — Create an Internet or Unix domain server socket

說明

resource stream_socket_server ( string $local_socket [, int &$errno [, string &$errstr [, int $flags = STREAM_SERVER_BIND | STREAM_SERVER_LISTEN [, resource $context ]]]] )

Creates a stream or datagram socket on the specified local_socket.

This function only creates a socket, to begin accepting connections use stream_socket_accept().

參數

local_socket

The type of socket created is determined by the transport specified using standard URL formatting: transport://target.

For Internet Domain sockets (AF_INET) such as TCP and UDP, the target portion of the remote_socket parameter should consist of a hostname or IP address followed by a colon and a port number. For Unix domain sockets, the target portion should point to the socket file on the filesystem.

Depending on the environment, Unix domain sockets may not be available. A list of available transports can be retrieved usingstream_get_transports(). See 所支持的套接字傳輸器（Socket Transports）列表 for a list of bulitin transports.

errno

If the optional errno and errstr arguments are present they will be set to indicate the actual system level error that occurred in the system-level socket(), bind(), and listen() calls. If the value returned in errno is 0 and the function returned FALSE, it is an indication that the error occurred before the bind() call. This is most likely due to a problem initializing the socket. Note that the errno anderrstr arguments will always be passed by reference.

errstr

See errno description.

flags

A bitmask field which may be set to any combination of socket creation flags.

Note:
For UDP sockets, you must use STREAM_SERVER_BIND as the flags parameter.

context

返回值

Returns the created stream, or FALSE on error.

范例

Example #1 Using TCP server sockets

<?php
$socket = stream_socket_server("tcp://0.0.0.0:8000", $errno, $errstr);
if (!$socket) {
  echo "$errstr ($errno)<br />\n";
} else {
  while ($conn = stream_socket_accept($socket)) {
    fwrite($conn, 'The local time is ' . date('n/j/Y g:i a') . "\n");
    fclose($conn);
  }
  fclose($socket);
}
?>

The example below shows how to act as a time server which can respond to time queries as shown in an example on stream_socket_client().

Note: Most systems require root access to create a server socket on a port below 1024.

Example #2 Using UDP server sockets

<?php
$socket = stream_socket_server("udp://127.0.0.1:1113", $errno, $errstr, STREAM_SERVER_BIND);
if (!$socket) {
    die("$errstr ($errno)");
}

do {
    $pkt = stream_socket_recvfrom($socket, 1, 0, $peer);
    echo "$peer\n";
    stream_socket_sendto($socket, date("D M j H:i:s Y\r\n"), 0, $peer);
} while ($pkt !== false);

?>

注釋

Note: 當指定數值型的 IPv6 地址（例如 fe80::1）時必須用方括號將 IP 圍起來——例如， tcp://[fe80::1]:80。

參見

stream_socket_client() - Open Internet or Unix domain socket connection
stream_set_blocking() - 為資源流設置阻塞或者阻塞模式
stream_set_timeout() - Set timeout period on a stream
fgets() - 從文件指針中讀取一行
fgetss() - 從文件指針中讀取一行并過濾掉 HTML 標記
fwrite() - 寫入文件（可安全用于二進制文件）
fclose() - 關閉一個已打開的文件指針
feof() - 測試文件指針是否到了文件結束的位置
Curl extension

add a note

User Contributed Notes 8 notes

down

davidm at marketo dot com ¶

6 years ago

In some specialized scenarios, you may want to create an AF_INET socket (UDP or TCP) but let the system select an unused port for you.  This is a standard feature of internet sockets but it doesn't seem to be documented how to do this for the stream_socket_server function.  It appears you can get this behavior by selecting zero for the port number, for example, my test below printed "127.0.0.1:4960". 

<?php 
  $sock = stream_socket_server("udp://127.0.0.1:0"); 
  $name = stream_socket_get_name($sock); 
  echo $name; 
?>

down

blackmac01 at gmail dot com ¶

8 months ago

I'm writing an HTTP server and I need SSL support, but getting this to work correctly with PHP streams took a bit of trial and error. For anyone who is trying to get an HTTP SSL server working with stream_socket_server:

1) Your SSL context will need to contain 'local_cert'. If  you did not include your private key with your local_cert, you'll also need to specify 'local_pk' which is your RSA key.  Your keys and certs should be PEM encoded, which means base-64. If your certificate has intermediary certs, you will need to specify those in the correct order: Your signed cert, intermediary cert 1, intermediary cert 2, etc. Each cert in the list needs to validate the one above it, but you do not need to include the CA Root that your SSL signer provided; that should already be included with the client's software (i.e. trust root certs).

You can append your private key in the file with your certs, however I keep mine in its own file. If you see the word "encrypted" when you view your key with a text viewer, you need to enter the correct passphrase and specify the context "passphrase", otherwise you can leave that one out.

As a server, verify_peer is irrelevant and should be set to false (should always be true if you are acting as an SSL client). Both cafile and capath contexts are not needed for functioning as a SSL/TLS server, but they are needed if you are making SSL connections with PHP as the client.

Lastly, the 'ciphers' context should be set to a list of secure ciphers. Search for "mozilla recommended ciphers" and choose the string of ciphers that works for you, because not all openssl supported ciphers are secure. I went with the "intermediate" list, which provides high security and compatibility.

2) When you create the binding for stream_socket_server(), make sure that you choose the tcp:// wrapper. DO NOT USE ssl:// or tls://. Anything other than tcp:// will not work correctly AS A SERVER, those transports are what you use when making connections with PHP as a client. 

Remember that the encryption does not start until after an SSL handshake completes, so the server has to listen in non-encrypted mode for new connections, and encryption doesn't start until certs are exchanged and a cipher is selected. When a new connection arrives you accept it with stream_socket_accept() and then use stream_socket_enable_crypto() to start the SSL session.

3) Keep in mind that the SSL handshake takes time, and that the stream_socket wrappers are high level and not as responsive as the socket extension due to the additional overhead they incur. For this reason you will need to enable blocking for accepting new connections.

<enable blocking on ServerListenStream>
newConnStream = stream_socket_accept(ServerListenStream);
<disable blocking on ServerListenStream>

<enable blocking on newConnStream >
stream_socket_enable_crypto(newConnStream, true, STREAM_CRYPTO_METHOD_SSLv23_SERVER);
<disable blocking on newConnStream >

Note that this is mainly for HTTP. If you are trying to do something like SMTP then your script will have to react to the "starttls" command, but it would be similar to the above except that you would wait for the "starttls" command before invoking the  stream_socket_enable_crypto() function on the client's stream.

TLS 1.0 is generally the way to go, SSLv3 is insecure and SSLv2 is buggy. If you use the mozilla recommend cipher list in your context, you'll be fine. Hope this helps someone out!

down

andrey at php dot net ¶

12 years ago

Just a small example how to use this function and also stream_select() to make a server that accepts more than one connections (can have many clients connected):
In master we hold all opened connections. Just before calling stream select we copy the array to $read and then pass it ot stream_select(). In case that we may read from at least one socket, $read will contain socket descriptors. $master is needed not to lose references to the opened connections we have.
stream_server.php : 
<?php

$master = array();
$socket = stream_socket_server("tcp://0.0.0.0:8000", $errno, $errstr);
if (!$socket) {
    echo "$errstr ($errno)<br />\n";
} else {
    $master[] = $socket;
    $read = $master;
    while (1) {
        $read = $master;
        $mod_fd = stream_select($read, $_w = NULL, $_e = NULL, 5);
        if ($mod_fd === FALSE) {
            break;
        }
        for ($i = 0; $i < $mod_fd; ++$i) {
            if ($read[$i] === $socket) {
                $conn = stream_socket_accept($socket);
                fwrite($conn, "Hello! The time is ".date("n/j/Y g:i a")."\n");
                $master[] = $conn;
            } else {
                $sock_data = fread($read[$i], 1024);
                var_dump($sock_data);
                if (strlen($sock_data) === 0) { // connection closed
                    $key_to_del = array_search($read[$i], $master, TRUE);
                    fclose($read[$i]);
                    unset($master[$key_to_del]);
                } else if ($sock_data === FALSE) {
                    echo "Something bad happened";
                    $key_to_del = array_search($read[$i], $master, TRUE);
                    unset($master[$key_to_del]);
                } else {
                    echo "The client has sent :"; var_dump($sock_data);
                    fwrite($read[$i], "You have sent :[".$sock_data."]\n");
                    fclose($read[$i]);
                     unset($master[array_search($read[$i], $master)]);
                }
            }
        }
    }
}
?>
stream_client.php:
<?php
$fp = stream_socket_client("tcp://127.0.0.1:8000", $errno, $errstr, 30);
if (!$fp) {
    echo "$errstr ($errno)<br />\n";
} else {
    fwrite($fp, "Aloha");
    while (!feof($fp)) {
        var_dump(fgets($fp, 1024));
    }
    fclose($fp);
}
?>

Thanks

down

frxstrem ¶

6 years ago

Using the OpenSSL extension, PHP can automatically generate self-signed SSL certificates, which can be used for basic authentication and encryption (although I would recommend to use a signed certificate instead) for SSL servers.

I have extended the script by 'e at osterman dot com' to automatically create self-signed certificates:

<?php
// Hello World! SSL HTTP Server.
// Tested on PHP 5.1.2-1+b1 (cli) (built: Mar 20 2006 04:17:24)

// Certificate data:
$dn = array(
    "countryName" => "UK",
    "stateOrProvinceName" => "Somerset",
    "localityName" => "Glastonbury",
    "organizationName" => "The Brain Room Limited",
    "organizationalUnitName" => "PHP Documentation Team",
    "commonName" => "Wez Furlong",
    "emailAddress" => "wez@example.com"
);

// Generate certificate
$privkey = openssl_pkey_new();
$cert    = openssl_csr_new($dn, $privkey);
$cert    = openssl_csr_sign($cert, null, $privkey, 365);

// Generate PEM file
# Optionally change the passphrase from 'comet' to whatever you want, or leave it empty for no passphrase
$pem_passphrase = 'comet';
$pem = array();
openssl_x509_export($cert, $pem[0]);
openssl_pkey_export($privkey, $pem[1], $pem_passphrase);
$pem = implode($pem);

// Save PEM file
$pemfile = './server.pem';
file_put_contents($pemfile, $pem);

$context = stream_context_create();

// local_cert must be in PEM format
stream_context_set_option($context, 'ssl', 'local_cert', $pemfile);
// Pass Phrase (password) of private key
stream_context_set_option($context, 'ssl', 'passphrase', $pem_passphrase);

stream_context_set_option($context, 'ssl', 'allow_self_signed', true);
stream_context_set_option($context, 'ssl', 'verify_peer', false);

// Create the server socket
$server = stream_socket_server('ssl://0.0.0.0:9001', $errno, $errstr, STREAM_SERVER_BIND|STREAM_SERVER_LISTEN, $context);

while(true)
{
    $buffer = '';
    print "waiting...";
    $client = stream_socket_accept($server);
    print "accepted " . stream_socket_get_name( $client, true) . "\n";
    if( $client )
    {
        // Read until double CRLF
        while( !preg_match('/\r?\n\r?\n/', $buffer) )
            $buffer .= fread($client, 2046); 
        // Respond to client
        fwrite($client,  "200 OK HTTP/1.1\r\n"
                         . "Connection: close\r\n"
                         . "Content-Type: text/html\r\n"
                         . "\r\n"
                         . "Hello World! " . microtime(true)
                         . "<pre>{$buffer}</pre>");
        fclose($client);
    } else {
        print "error.\n";
    }
}

?>

down

Aurelien Marchand ¶

5 years ago

In the case of AF_UNIX sockets, note the named sockets that will be created respects your umask(). So if you wanted your named socket to be writeable to all, do umask(0) prior to calling stream_socket_server().

AM

down

peterjb at me dot com ¶

6 years ago

I had a horrible time trying to shove a TLS socket into an existing TCP program.  It appears to me that functions like stream_socket_recvfrom and stream_socket_sendto don't work with TLS/SSL (which may be obvious to PHP gurus...sorry if it is, I'm in a bit over my head here).

In the end I ended up doing all my IO with fread() and fwrite(), which solved all my problems.

down

-1

Neil Munro ¶

10 years ago

If you want a high speed socket server, use the low-level sockets instead (socket_create/bind/listen). The stream_socket_server version appears to have internal fixed 8k buffers that will overflow if you don't keep up by reading.

This is a serious problem if you an application that reads the socket for messages and then, say, saves the result in a database. The delay while it is busy processing means you can't read the data in time unless you get involved in muti-threading.

With the the low-level functions, the OS quietly buffers TCP/IP packets so there is no problem (tested on Windows XP Professional).

down

-2

Julien Picalausa ¶

7 years ago

You may have noticed that, unlike socket_listen, stream_socket_server doesn't have a backlog parameter. From the source code of php 5.2.9, it looks like the backlog parameter to the actual listen call is hardcoded to be 5. If this value doesn't suit your needs, you'll have to use the lower-level socket functions.

posted on 2016-08-29 16:28 思月行云閱讀(645) 評論(0) 編輯收藏引用所屬分類: PHP

青青草原综合久久大伊人导航_色综合久久天天综合_日日噜噜夜夜狠狠久久丁香五月_热久久这里只有精品

常用鏈接

留言簿(1)

隨筆分類

隨筆檔案

相冊

Awesome

Blog

Book

GitHub

Link

搜索

積分與排名

最新評論

閱讀排行榜

stream_socket_server

說明

參數

返回值

范例

注釋

參見

User Contributed Notes 8 notes

只有注冊用戶登錄后才能發表評論。


相關文章: PHP 注冊錯誤和異常處理機制 PHP在linux上執行外部命令的方法 PHP服務器500顯示具體錯誤 PHP根據IP地址獲取所在城市（新浪API） PHP之十六個魔術方法詳解 zeroMQ消息隊列介紹及zeroMQ/php-zmq安裝 PHP高級編程之守護進程 PHP-Socket 深度探索 PHP實現基于Select模型的服務端套接字監聽 PHP官方Windows擴展資源索引

網站導航: 博客園 IT新聞 BlogJava 博問 Chat2DB 管理