MaxDataRetries"="5"
對于實用的程序來說，2小時的空閑時間太長。因此，我們需要手工開啟Keepalive功能并設置合理的Keepalive參數。
// 開啟KeepAlive
BOOL bKeepAlive = TRUE;
int nRet = ::setsockopt(socket_handle, SOL_SOCKET, SO_KEEPALIVE, (char*)&bKeepAlive, sizeof(bKeepAlive));
if (nRet == SOCKET_ERROR)
{
return FALSE;
}
// 設置KeepAlive參數
tcp_keepalive alive_in = {0};
tcp_keepalive alive_out = {0};
alive_in.keepalivetime = 5000; // 開始首次KeepAlive探測前的TCP空閉時間
alive_in.keepaliveinterval = 1000; // 兩次KeepAlive探測間的時間間隔
alive_in.onoff = TRUE;
unsigned long ulBytesReturn = 0;
nRet = WSAIoctl(socket_handle, SIO_KEEPALIVE_VALS, &alive_in, sizeof(alive_in),
&alive_out, sizeof(alive_out), &ulBytesReturn, NULL, NULL);
if (nRet == SOCKET_ERROR)
{
return FALSE;
}
開啟Keepalive選項之后，對于使用IOCP模型的服務器端程序來說，一旦檢測到連接斷開，GetQueuedCompletionStatus函數將立即返回FALSE，使得服務器端能及時清除該連接、釋放該連接相關的資源。對于使用select模型的客戶端來說，連接斷開被探測到時，以recv目的阻塞在socket上的select方法將立即返回SOCKET_ERROR，從而得知連接已失效，客戶端程序便有機會及時執行清除工作、提醒用戶或重新連接。
另一種技術，由應用程序自己發送心跳包來檢測連接的健康性。客戶端可以在一個Timer中或低級別的線程中定時向發服務器發送一個短小精悍的包，并等待服務器的回應。客戶端程序在一定時間內沒有收到服務器回應即認為連接不可用，同樣，服務器在一定時間內沒有收到客戶端的心跳包則認為客戶端已經掉線。
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
windows下此處的”非正常斷開”指TCP連接不是以優雅的方式斷開,如網線故障等物理鏈路的原因,還有突然主機斷電等原因.
有兩種方法可以檢測:
1.TCP連接雙方定時發握手消息
2.利用TCP協議棧中的KeepAlive探測
第二種方法簡單可靠,只需對TCP連接兩個Socket設定KeepAlive探測,
所以本文只講第二種方法在Linux,Window2000下的實現(在其它的平臺上沒有作進一步的測試)
Windows 2000平臺下 頭文件
#include <mstcpip.h>
//定義結構及宏
/*
struct TCP_KEEPALIVE {
u_longonoff;
u_longkeepalivetime;
u_longkeepaliveinterval;
} ;
*/
tcp_keepalive live,liveout;
live.keepaliveinterval=5000; //每5秒發一次探測報文,發5次沒有回應，就斷開
live.keepalivetime=30000;//超過30s沒有數據，就發送控測包
live.onoff=TRUE;
int Opt = 1;
int iRet = setsockopt(Accept,SOL_SOCKET,SO_KEEPALIVE,(char *)&Opt,sizeof(int));
if(iRet == 0){
DWORD dw;
if(::WSAIoctl(Accept,SIO_KEEPALIVE_VALS,
&live,sizeof(live),&liveout,sizeof(liveout),
&dw,NULL,NULL)== SOCKET_ERROR){
}
}
ACE下代碼 //by rainfish blog.csdn.net/bat603
int Opt = 1;
//在測試過程中，發現檢測的次數是5次，即下面的設置中，從最近一次消息開始計算的10秒后，每次間隔5秒，連續發送5次，即35秒發現網絡斷了
tcp_keepalive live,liveout;
live.keepaliveinterval=5000; //每次檢測的間隔 （單位毫秒）
live.keepalivetime=10000; //第一次開始發送的時間（單位毫秒）
live.onoff=TRUE;
int iRet = stream.set_option(SOL_SOCKET,SO_KEEPALIVE,&Opt,sizeof(int));
if(iRet == 0){
DWORD dw;
//此處顯示了在ACE下獲取套接字的方法，即句柄的(SOCKET)化就是句柄
if(WSAIoctl((SOCKET)h,SIO_KEEPALIVE_VALS,&live,sizeof(live),
&liveout,sizeof(liveout),&dw,NULL,NULL)== SOCKET_ERROR){
//Delete Client
return;
}
}
Linux平臺下
#include "/usr/include/linux/tcp.h"
#include "/usr/include/linux/socket.h"
////KeepAlive實現，單位秒
//下面代碼要求有ACE,如果沒有包含ACE,則請把用到的ACE函數改成linux相應的接口
int keepAlive = 1;//設定KeepAlive
int keepIdle = 5;//開始首次KeepAlive探測前的TCP空閉時間
int keepInterval = 5;//兩次KeepAlive探測間的時間間隔
int keepCount = 3;//判定斷開前的KeepAlive探測次數
if(setsockopt(s,SOL_SOCKET,SO_KEEPALIVE,(void*)&keepAlive,sizeof(keepAlive)) == -1)
{
ACE_DEBUG ((LM_INFO,
ACE_TEXT ("(%P|%t) setsockopt SO_KEEPALIVE error!/n")));
}
if(setsockopt(s,SOL_TCP,TCP_KEEPIDLE,(void *)&keepIdle,sizeof(keepIdle)) == -1)
{
ACE_DEBUG ((LM_INFO,
ACE_TEXT ("(%P|%t) setsockopt TCP_KEEPIDLE error!/n")));
}
if(setsockopt(s,SOL_TCP,TCP_KEEPINTVL,(void *)&keepInterval,sizeof(keepInterval)) == -1)
{
ACE_DEBUG ((LM_INFO,
ACE_TEXT ("(%P|%t) setsockopt TCP_KEEPINTVL error!/n")));
}
if(setsockopt(s,SOL_TCP,TCP_KEEPCNT,(void *)&keepCount,sizeof(keepCount)) == -1)
{
ACE_DEBUG ((LM_INFO,
ACE_TEXT ("(%P|%t)setsockopt TCP_KEEPCNT error!/n")));
}
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++