5. (OPTIONAL) Install the wxWidgets documentation.

sudo apt-get install wx2.6-doc

（注：在下載wxWidgets系列庫的時候其實可以直接使用新立得軟件更新包管理器來 搜索wxWidgets字眼，然后從當中的列表中選擇最新的庫來裝.直接選就可以省掉上面一對麻煩的命令，其實上面的幾個步驟無非就是完成libgtk庫 和wxWidgets相關庫的安裝，這在新利得上搜索wxWidgets很容易選擇。）
To install wxWidgets 2.8.4 you need to be using Ubuntu 6.10 (Edgy Eft) or Ubuntu 7.04 (Feisty Fawn) and you need to add the wxWidget repository to your sources.list. You can install wxWidgets 2.8.4 on Ubuntu 6.06 (Dapper Drake), but the nightly builds are not made to run on Dapper.

1. Backup your current sources.list first for precaution.

sudo cp /etc/apt/sources.list /etc/apt/sources.list.bak

2. Open your sources.list in a text editor to edit it.

gksudo gedit /etc/apt/sources.list

3. Add the correct repository for the Ubuntu version you are running to the end of the file. The repository listed below is referenced on the wxWidgets.org download page and appears to be for the stable version.

deb http://apt.tt-solutions.com/ubuntu/ edgy main

or

deb http://apt.tt-solutions.com/ubuntu/ feisty main

4. Save and close the file.

5. Add the key for tt-solutions.com.

sudo wget http://www.tt-solutions.com/vz/key.asc

sudo apt-key add key.asc

Alternate wxWidgets repository. Some users of Code::Blocks have received critical errors related to libwxgtk when using the above repository packages. They were able to solve their problems by installing newer packages available from an alternate repository from wxWidgets.org. To use these packages make the following changes to the above directions:

Add deb http://apt.wxwidgets.org/ edgy-wx main or deb http://apt.wxwidgets.org/ feisty-wx main to your sources.list.

Download the gpg key using wget http://apt.wxwidgets.org/key.asc and install the same as above.

6. Update your sources.list and run upgrade to make sure everything is up-to-date.

sudo apt-get update

sudo apt-get dist-upgrade

7. Now you're finally ready to install wxWidgets 2.8.4.

sudo apt-get install libwxgtk2.8-0 libwxgtk2.8-dev wx2.8-headers wx-common

8. Set wxWidgets 2.8 as default version for your machine. Select number for the wxgtk2.8 version.

sudo update-alternatives --config wx-config

Now go get the nightly build and install it. All dependencies should now be met.

1. Get the latest nigtly build of Code::Blocks from the nightly builds forum.

2. Install Code::Blocks.

sudo dpkg -i <Name_Of_Daily_Build.deb>

NOTE: Since revision 4281 and after, the nightly builds are made differently. Codeblocks is now packaged into separate Debian packages and the packages are archived together in a tar.gz file.

（編 者注：其實所謂的nightly build版本只是在version4281之前才有效，后來的的版本是不需要下載所謂的nightly＆＆deb版本，直接到官方網站下載deb包，里 頭有6個小包，直接使用后面的dpkg -i *.deb就可以了。這里頭千萬別被nighlt弄混了，直接無視就是了。）

1. Download the tar.gz file to your computer and extract the files to an empty directory, such as one called temp for example.

tar xvf CB_date-of-build_revision-number_Ubuntu6.10+7.04_wx2.8.4.tar.gz

（編者注：這里只是解壓deb的命令，也可以直接在IDE上右鍵選擇“解壓縮到此處。。。”即可）

2. Install all the packages at the same time.

sudo dpkg -i *.deb
(注：大功告成的語句）

The packages can be installed individually, if you prefer not to install everything. The first package to install is libcodeblocks0 followed by the codeblocks package. All the other packages are optional. If you want to install the wxsmith and/or contrib packages, you must install the libwxsmithlib0 package first.

NOTE: Here is a complete command line for the above steps. Watch for word wrap. Replace wx2.6 with wx2.8 when needed.

（編者注：這里只是提供一個替換wx2.6到最新版（目前為止）2.8時的命令）

sudo apt-get install build-essential gdb libwxgtk2.6-0 libwxgtk2.6-dev wx2.6-headers wx2.6-doc wx-common

Without optional steps:

sudo apt-get install build-essential gdb libwxgtk2.6-0 libwxgtk2.6-dev wx2.6-headers wx-common

也許大家要問了，如果是想自己用源碼從頭到尾進行編譯怎么辦？我這里也有一個解決方案，
原理和步驟基本上和上文類似，大家可以參考一下：

至此全部ok了 經測驗第一種方法完全可行，并且在我的Ubuntu8.04上順利啟動，哈哈，Ejoy it！

http://blog.csdn.net/xugang_2001/archive/2008/11/05/3230598.aspx