1.下載一個打印驅動.并修改里面的INF文件.

2.修改DDK 里面的例子 genprint, 并使用ddk里的build命令直接build.
  (順帶說一下,執行build程序要先執行Windows XP Checked Build Environment 這樣的環境設置BAT)
  修改的地方是:winprint.c 里的 PrintDocumentOnPrintProcessor 函數,將其中 調用PrintEMFJob的地方更改為我們處理的函數.
  一般會將這個函數放在另一個DLL中.
 
3.更改注冊表,使其spl文件名根據job id生成.這樣我們通過其JOB ID就可以得到相應的SPL文件.
  參考:http://www.undocprint.org/winspool/spool_files#reading_job_data 里面的 Force JobID in Spoolfile names

4.通過spl文件結構,獲取EMF文件。

5.把EMF文件轉換為其它圖片文件。

 
QA:
Q:如何修改打印驅動?我對里面的驅動格式一點都不熟悉。
A:不用改了,我用的是HP LaserJet 4驅動,下載地址：
  http://h50176.www5.hp.com/support/C2001A/more_info_soar_lj631sc.html
  
  以下是inf內容:
/////////////////////////////////////inf start///////////////////////////////////////
;Hewlett-Packard LaserJet combined printer driver INF file for Windows XP and 2000
;Copyright Hewlett-Packard 2001
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%虛擬打印%
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=1/18/2002,02.00.12.02
; Manufacturer section.
;
; This section lists all of the manufacturers
; that we will display in the Dialog box
[Manufacturer]
%虛擬打印%=DefaultInstall

;
; MS Driver Core installs
;
; These sections are used by Printer OEMs to install MS provided drivers
; Installer Sections
;
; These sections control file installation, and reference all files that
; need to be copied. The section name will be assumed to be the driver
; file, unless there is an explicit DriverFile section listed.
;
; Note: Pulling HPLJ4.GPD via Needs= directive to get pcl5eres.dll from XP
;       drivers.cab file due to XP defect whereby this file wasn't listed
;       This also takes care of pjlmon.dll, ttfsub.gpd, UNIDRV sections
;       but unavoidably brings with it the unneeded hplj4.gpd file.
;     
;   In the case of the LJ4 install does Needs=HPLJ4.GPD overwrite the
;   just copied newer version of hplj4.gpd??? In this case perhaps, use
;   Needs=HPLJ4L.GPD to avoid this issue?
;
; Phase II GPDs
[DefaultInstall]
"虛擬打印機"                 = HPLJ4L.GPD.XP        ,Hewlett-PackardLaserC029,HP_LaserJet_4L
;Hewlett-PackardLaserC029是設備的ID
;
; XP
;Old CopyFiles statement before use of Includes= & Needs= ...
;CopyFiles=HPPRPROC,UI,RENDER,@HPLJ4.GPD,@hpc02.ini,RES_COMMON,HELP,UNIDRV,PJLMON.DLL,@TTFSUB.GPD
[HPLJ4L.GPD.XP]
CopyFiles=HPPRPROC,@HPLJ4L.GPD,@hpcstr02.dll
Include=NTPRINT.INF
Needs=HPLJ4.GPD
DataSection=HP_UNIDRV_BIDI_DATA
DataFile=HPLJ4L.GPD
PrintProcessor=%PRINT_PROCESSOR%

; Copy Sections
;
; Lists of files that are actually copied. These sections are referenced
; from the installer sections, above. Only create a section if it contains
; two or more files (if we only copy a single file, identify it in the
; installer section, using the @filename notation) or if it's a color
; profile (since the DestinationDirs can only handle sections, and not
; individual files).

[RES_COMMON]
pcl5eres.dll
hpcstr02.dll

[HPPRPROC]
genprint.dll,,,0x00000020

;
; Data Sections
;
[HP_UNIDRV_DATA]
DriverFile=UNIDRV.DLL
ConfigFile=UNIDRVUI.DLL
HelpFile=UNIDRV.HLP
; Data section that attaches PJLMON as the driver Lang Monitor
[HP_UNIDRV_BIDI_DATA]
DriverFile=UNIDRV.DLL
ConfigFile=UNIDRVUI.DLL
HelpFile=UNIDRV.HLP
LanguageMonitor=%PJL_MONITOR%

;
; Call SetupSetDirectoryId with 66000 to set the target directory at runtime
; (depending on which environment drivers are getting installed)
;
[DestinationDirs]
DefaultDestDir=66000
HPPRPROC=66001
PJLMON.DLL=66002
;
; Control Flags
;
[ControlFlags]
ExcludeFromSelect = HWP20D0, HWP21A0, HWP2140, HWP20F0
;
;  Source Disk Section
;  This was added to enable Web Point&Print.
;  All files added to this must also be added to Layout.INF
;
[SourceDisksNames]
1=%DiskID1%,,,""
[SourceDisksFiles]
;
; MS Files
;
PCL5ERES.DLL = 1
UNIDRV.DLL   = 1
UNIRES.DLL   = 1
UNIDRVUI.DLL = 1
STDNAMES.GPD = 1
UNIDRV.HLP   = 1
TTFSUB.GPD   = 1
;
; Phase II
;
HPCUI02.DLL  = 1
HPCRD02.DLL  = 1
HPCFNT02.DLL = 1
HPCSTR02.DLL = 1
genprint.dll  = 1
HPCLJX02.HLP = 1
HPC02.INI    = 1
HPOEMUI.DLL  = 1
HPCMBOX.INI  = 1
HPLJ4L.GPD   = 1
;
; Localizable Strings
;
[Strings]
PrinterClassName="Printers"
DiskID1="虛擬打印安裝盤"
PJL_MONITOR="PJL Language Monitor,PJLMON.DLL"
;PRINT_PROCESSOR="HPPRN02,hpprn02.dll"
PRINT_PROCESSOR="Vprint,genprint.dll"
虛擬打印="虛擬打印"

//////////////////////////inf end//////////////////////////




Q:為什么我在打印的時候, PrintDocumentOnPrintProcessor 沒有被調用?
A:可能是因為在你的虛擬打印機設了脫機的原故,當時我就碰到了.
 

Q:如何方便調試.
A:因為genprint.dll是被Print服務占用的,因此,替換的時候需要停止改服務.
  Net Start "Print Spooler"
  Copy file file
  Net Stop  "Print Spooler"

Q:從SPL中分離出EMF文件需要注意什么嗎?
A:一定會用到的三個結構 SPL_HEADER(SPL頭)、SMR(SPL記錄)、ENHMETAHEADER(EMF頭).

Q:我不能用acdsee等軟件打開分離出的EMF,但為什么用IE是可以打得開的?
  也許你用的是SMR::nSize 來做為EMF的write size
  而不是使用ENHMETAHEADER::nBytes 來做為EMF的write size
 
Q:我想通過GDI+把EMF文件轉為BMP,為什么文字部份顯視黑屏?
A:不知道,我是用IPicture 讀取,并且Render到DC后再保存為BMP的,這樣也不行,在Render內存的時候就不行了。
   最后我用的是CXImage 這個庫做的轉換.

Q:最后我的OFFICE 2007里面的文字打印出來被擠得變形了。
A:嘿嘿嘿，其實我已經放棄了這個方案了。使用OEMDLL里面的Bitmap例子來實現了。

網上的資料:
http://www.undocprint.org                               95%以上的資料來源.
http://www.microsoft.com/india/msdn/articles/130.aspx   有個專門的函數取得相關的SPL文件名.
http://fxh7622.blog.51cto.com/63841/d-3                 最先找到的網址,里面的例子部分是用DELPHI的,我的INF文件就是從這里拷的