來自
http://www.cnblogs.com/walzer/archive/2006/04/21/380851.html首先解釋下這兩個東東
The RAM on a Windows CE–based device is divided into two areas: the object store and the program memory.
The object store resembles a permanent, virtual RAM disk. Data in the object store is retained when you suspend or perform a soft reset operation on the system. Devices typically have a backup power supply for the RAM to preserve data if the main power supply is interrupted temporarily. When operation resumes, the system looks for a previously created object store in RAM and uses it, if one is found. Devices that do not have battery-backed RAM can use the hive-based registry to preserve data during multiple boot processes.
The program memory consists of the remaining RAM. Program memory works like the RAM in personal computers — it stores the heaps and stacks for the applications that are running.
我承認我很懶，上面一段話的URL是ms-help://MS.WindowsCE.500/wcecoreos5/html/wce50conMemoryArchitecture.htm
具體的設置可以在系統啟動后，Control Panel -> System -> Memory 里面看到。默認的是把內存五五開，一半給Storage Memory， 一半給Program Memory用。這樣顯然是不合算的。以64M的RAM為例, 啟動后Storage Memory 32M, 而因?yàn)闆]有留出界面讓用戶往里面拷東西, 任何時候in use都不會超過10M; Program Memory也是32M, 但啟動后就用掉27M, 實際上應用程序可用的內存只有5M, 一旦達到了上限, 那么每前進一步都要很艱難地去釋放幾十K內存，然后用掉，再去釋放幾十K內存，如此循環，此時應用程序的運行速度狂慢無比.
劃分的方法也很簡單, 只不過可能沒人注意到而已.
說明在ms-help://MS.WindowsCE.500/wceosdev5/html/wce50lrfFSRAMPERCENT.htm? 懶得看英文的人就繼續往下看
其實說白了就一句話, 在BSP的config.bib里 CONFIG 區添加這個變量 FSRAMPERCENT = 0xXXXXXX, 但注意兩點，
(1) 必須寫在config.bib的CONFIG區里, 不是plagform.bib不是config.reg等其他文件而是config.bib，也不是config.bib文件的任意地方而一定要在CONFIG REGION里.
(2) FSRAMPERCENT這個變量一定得寫為FSRAMPERCENT, 不能寫成FSROMPERCENT不能寫成ILOVEU, 或者阿貓阿狗什么的.
寫下這兩句的時候本人已經打開無敵光環, 免疫一切雞蛋和西紅柿.
FSRAMPERCENT是一個4byte長度的十六進制數, 我們用代數假設 FSRAMPERCENT = 0xQXYZ, 其中Q,X,Y,Z都是十六進制數
那么最終劃分給Storage Memory的大小 =? ( Q + X + Y +? Z ) / 0x400 * TOTAL_RAM_SIZE
以文中的例子來算, FSRAMPERCENT=0x10203040, 假設TOTAL_RAM_SIZE=64M, 那么StorageMemory= (0x10 + 0x20 + 0x30 + 0x40) / 0x400 * 64M = 10M.