色综合久久久久久久久五月,久久香蕉一级毛片,国产日韩久久久精品影院首页

[11月份已解決的問題]wince系統如何添加Intel82559er的網卡驅動

我用的板子是臺灣研華的PCM-3350,Intel82559er的網卡.由于wince不支持,板子從CF卡啟動IMAGE后無法設置網絡.

通過以下步驟添加Intel82559er的驅動(我用的BSP是CEPC,選用internet 模板定制的OS):

1.從INTEL下載了intel8255xer for wince5.0的驅動,把里頭的e100ce5er.cec導入到目錄中,在Third Party中出現了intel的驅動

2.參照所下載驅動的config.bib,在OS 的配置文件中加入為網卡保留的memory段,EPKTBUF 801DC000 00020000 RESERVED

3.在platform.reg中添加驅動的相關項如下:

; Intel(R) 8255x Registry configuration, if enabled
IF CEPC_INTELFE_PCI

;Create registry information for Intel(R) Miniport Driver

[HKEY_LOCAL_MACHINE\Comm\E100CE]
? "DisplayName"="Intel(R) Fast Ethernet Controller"
? "Group"="NDIS"
? "ImagePath"="e100ce.dll"

;Create registry information for template (will be copied to ALL instances of
;adapters using the Intel Miniport Driver

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\E100CE]
;PCI Bus Enumeration Information
? "Class"=dword:02
? "SubClass"=dword:00
? "ProgIF"=dword:0
? "VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086"
? "DeviceID"=multi_sz:"1209","1229","2449","1031","1032","1033","1034","1035","1036","1037","1038","1039","103A","103B"
? "Dll"="NDIS.dll"
? "Entry"="NdisPCIBusDeviceInit"
? "Transceiver"=dword:3
;Installable ISR Handler Information
? "IsrDll"="giisr.dll"
? "IsrHandler"="ISRHandler"
? "PortIsIO"=dword:0
? "PortOffset"=dword:0
? "PortSize"=dword:4
? "PortMask"=dword:20F0

;Settings for DHCP IP Configuration, if enabled
IF DHCP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE1\Parms\TcpIp]
? "EnableDHCP"=dword:1
? ; This should be MULTI_SZ
? "DefaultGateway"=""
? ; Use zero for broadcast address? (or 255.255.255.255)
? "UseZeroBroadcast"=dword:0
? ; This should be MULTI_SZ, the IP address list
? "IpAddress"="0.0.0.0"
? ; This should be MULTI_SZ, the subnet masks for the above IP addresses
? "Subnetmask"="0.0.0.0"
ENDIF ;//DHCP

;Settings for static IP configuration, if enabled
IF STATIC_IP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE1\Parms\TcpIp]
? "EnableDHCP"=dword:0
? ; This should be MULTI_SZ
? "DefaultGateway"="1.2.3.0"
? ; Use zero for broadcast address? (or 255.255.255.255)
? "UseZeroBroadcast"=dword:0
? ; This should be MULTI_SZ, the IP address list
? "IpAddress"="1.2.3.4"
? ; This should be MULTI_SZ, the subnet masks for the above IP addresses
? "Subnetmask"="255.0.0.0"
ENDIF ;//Static IP

[HKEY_LOCAL_MACHINE\Comm\E100CEB]
? "DisplayName"="Intel(R) Fast Ethernet Controller"
? "Group"="NDIS"
? "ImagePath"="e100ce.dll"

;Create registry information for template (will be copied to ALL instances of
;adapters using the Intel Miniport Driver

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\E100CEB]
;PCI Bus Enumeration Information
? "Class"=dword:02
? "SubClass"=dword:00
? "ProgIF"=dword:0
? "VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086"
? "DeviceID"=multi_sz:"103C","103D","103E","1050","1051","1052","1053","1054","1055","1056","1057","2459","245D"
? "Dll"="NDIS.dll"
? "Entry"="NdisPCIBusDeviceInit"
? "Transceiver"=dword:3
;Installable ISR Handler Information
? "IsrDll"="giisr.dll"
? "IsrHandler"="ISRHandler"
? "PortIsIO"=dword:0
? "PortOffset"=dword:0
? "PortSize"=dword:4
? "PortMask"=dword:20F0

;Settings for DHCP IP Configuration, if enabled
IF DHCP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CEB1\Parms\TcpIp]
? "EnableDHCP"=dword:1
? ; This should be MULTI_SZ
? "DefaultGateway"=""
? ; Use zero for broadcast address? (or 255.255.255.255)
? "UseZeroBroadcast"=dword:0
? ; This should be MULTI_SZ, the IP address list
? "IpAddress"="0.0.0.0"
? ; This should be MULTI_SZ, the subnet masks for the above IP addresses
? "Subnetmask"="0.0.0.0"
ENDIF ;//DHCP

;Settings for static IP configuration, if enabled
IF STATIC_IP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CEB1\Parms\TcpIp]
? "EnableDHCP"=dword:0
? ; This should be MULTI_SZ
? "DefaultGateway"="1.2.3.0"
? ; Use zero for broadcast address? (or 255.255.255.255)
? "UseZeroBroadcast"=dword:0
? ; This should be MULTI_SZ, the IP address list
? "IpAddress"="1.2.3.4"
? ; This should be MULTI_SZ, the subnet masks for the above IP addresses
? "Subnetmask"="255.0.0.0"
ENDIF ;//Static IP

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\E100CEC]
;PCI Bus Enumeration Information
? "Class"=dword:02
? "SubClass"=dword:00
? "ProgIF"=dword:0
? "VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086"
? "DeviceID"=multi_sz:"1064","1065","1066","1067","1068","1069","106A","106B"
? "Dll"="NDIS.dll"
? "Entry"="NdisPCIBusDeviceInit"
? "Transceiver"=dword:3
;Installable ISR Handler Information
? "IsrDll"="giisr.dll"
? "IsrHandler"="ISRHandler"
? "PortIsIO"=dword:0
? "PortOffset"=dword:0
? "PortSize"=dword:4
? "PortMask"=dword:20F0

;Settings for DHCP IP Configuration, if enabled
IF DHCP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CEC1\Parms\TcpIp]
? "EnableDHCP"=dword:1
? ; This should be MULTI_SZ
? "DefaultGateway"=""
? ; Use zero for broadcast address? (or 255.255.255.255)
? "UseZeroBroadcast"=dword:0
? ; This should be MULTI_SZ, the IP address list
? "IpAddress"="0.0.0.0"
? ; This should be MULTI_SZ, the subnet masks for the above IP addresses
? "Subnetmask"="0.0.0.0"
ENDIF ;//DHCP

;Settings for static IP configuration, if enabled
IF STATIC_IP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CEC1\Parms\TcpIp]
? "EnableDHCP"=dword:0
? ; This should be MULTI_SZ
? "DefaultGateway"="1.2.3.0"
? ; Use zero for broadcast address? (or 255.255.255.255)
? "UseZeroBroadcast"=dword:0
? ; This should be MULTI_SZ, the IP address list
? "IpAddress"="1.2.3.4"
? ; This should be MULTI_SZ, the subnet masks for the above IP addresses
? "Subnetmask"="255.0.0.0"
ENDIF ;//Static IP

ENDIF ;//Intel(R) miniport registry additions

4.在platform.bib的module段,添加E100CE.dll $(_FLATRELEASEDIR)\E100CE.dll NK SH

5.拷貝e100ce.dll以及e100ce5er,e100ce5.rel三個文件到%winceroot\platform\yourplatform\files目錄下(其中的yourplatform是指你所選的BSP對應的)

重新sysgen,注意選中clean before building

鏡像起來后,即可設置網絡項了

posted on 2006-12-08 10:55 milkyway 閱讀(3192) 評論(5) 編輯收藏引用所屬分類: Wince學習小結

還有幾個問題待解決
1.雖然鏡象起來后可以設置網絡,可是我不明白為何要把e100ce5er.cec和e100ce5.rel拷貝到%winceroot\platform\yourplatform\files目錄下,如果沒有拷貝,網絡還是不能設置.這兩個文件的作用待考

2.我用的CEPC的BSP ,在DOS里選loadcepc (local nk),鏡象起來后的分辨率低,導致窗口字體很大,溢出了.應該怎樣設置才能正常?

我試過loadcepc /l:命令,可是它總是停在jumping to...上,無法啟動OS

3.文件拷貝目錄需要研究.拷貝到%winceroot\platform\yourplatform\files下,所有相同平臺下的OS都可以用,而拷貝到pbworkspaces/{youros}/reldir下就只能當前OS有效了.
我的理解是和"在platform.bib的module段,添加E100CE.dll $(_FLATRELEASEDIR)\E100CE.dll NK SH"這句有關,所謂的$(_FLATRELEASEDIR)也就是NK將要生成的目錄.如果拷貝到reldir,是在sysgen階段處理的;而如果拷貝到平臺FILES下是在RELEASECOPY階段拷貝到release目錄下的.
回復更多評論

# re: [11月份已解決的問題]wince系統如何添加Intel82559er的網卡驅動 2006-12-09 21:14 相思酸中有甜

有看到過資料,說是要修改CE_PhysAddr Registry Value與config.bib匹配.我找了許久,應該是在platform.reg中設置但貌似在PB5中已經不需要這樣設置了. 回復更多評論

# re: [11月份已解決的問題]wince系統如何添加Intel82559er的網卡驅動 2007-01-06 12:19 dailyprg

樓主你好，我也需要用PCM-3350開發，不知可否向你學習一下，加我一下，向學習
MSN ： dailyprg@hotmail.com
QQ : 27278085 回復更多評論

# re: [11月份已解決的問題]wince系統如何添加Intel82559er的網卡驅動 2007-01-14 10:21 相思酸中有甜

QQ已經加你了.問題也可以在留言里討論回復更多評論

# re: [11月份已解決的問題]wince系統如何添加Intel82559er的網卡驅動 2007-07-20 14:52 劉杰

你好,我手上有一個臺灣研華的PCM-3370的板子,也想做一下上網的功能.但是有很多地方不太明白.你所說的網卡,是板子原來就有的,還是自己后來加的呢?我現在也在做PC104,但是開發性的東西比較少.希望你能在百忙之中指點我一下.我的QQ是94384249.不勝感激! 回復更多評論

刷新評論列表

只有注冊用戶登錄后才能發表評論。
【推薦】100%開源！大型工業跨平臺軟件C++源碼提供，建模，組態！

相關文章: 基于Windows CE的數據采集與控制系統設計與實現基于Windows CE的嵌入式系統開發流程嵌入式操作系統Windows CE之架構概述 iMX21 ADS上如何燒寫WinCE SamArmDvk9II 開發板上跑WinCE Windows CE在i.MX21平臺上的虛實地址映射技術 Windows CE在 SBC-2410X Nand Flash上的燒寫 i.MX21平臺之剖析Windows CE 5.0 Eboot i.MX21平臺上Startup.s代碼的分析 Windows CE Boot Loader的流程分析

網站導航: 博客園 IT新聞 BlogJava 博問 Chat2DB 管理

# re: [11月份已解決的問題]如何添加Intel82559er的網卡驅動 2006-12-08 11:20 相思酸中有甜

# re: [11月份已解決的問題]wince系統如何添加Intel82559er的網卡驅動 2006-12-09 21:14 相思酸中有甜

# re: [11月份已解決的問題]wince系統如何添加Intel82559er的網卡驅動 2007-01-06 12:19 dailyprg

# re: [11月份已解決的問題]wince系統如何添加Intel82559er的網卡驅動 2007-01-14 10:21 相思酸中有甜

# re: [11月份已解決的問題]wince系統如何添加Intel82559er的網卡驅動 2007-07-20 14:52 劉杰

milkyway的窩

[11月份已解決的問題]wince系統如何添加Intel82559er的網卡驅動

評論

導航

統計

公告

常用鏈接

留言簿(37)

隨筆分類(104)

隨筆檔案(101)

文章分類(51)

文章檔案(53)

wince牛人

搜索

積分與排名

最新評論

閱讀排行榜

評論排行榜