如果你不投遞（POST）Overlapped I/O，那么I/O Completion Ports 只能為你提供一個Queue.
CreateIoCompletionPort的NumberOfConcurrentThreads：
1.只有當?shù)诙€參數ExistingCompletionPort為NULL時它才有效，它是個max threads limits.
2.大家有誰把它設置為超出cpu個數的值，當然不只是cpu個數的2倍，而是下面的MAX_THREADS 100甚至更大。
對于這個值的設定，msdn并沒有說非得設成cpu個數的2倍，而且也沒有把減少線程之間上下文交換這些影響扯到這里來。I/O Completion Ports MSDN:"If your transaction required a lengthy computation, a larger concurrency value will allow more threads to run. Each completion packet may take longer to finish, but more completion packets will be processed at the same time. "。
對于struct OVERLAPPED，我們常會如下擴展，
typedef struct {
WSAOVERLAPPED overlapped; //must be first member? 是的，必須是第一個。如果你不肯定，你可以試試。
SOCKET client_s;
SOCKADDR_IN client_addr;
WORD optCode;//1--read,2--send. 有人常會定義這個數據成員，但也有人不用，爭議在send/WSASend,此時的同步和異步是否有必要？ 至少我下面的server更本就沒用它。
char buf[MAX_BUF_SIZE];
WSABUF wsaBuf;//inited ? 這個不要忘了！
DWORD numberOfBytesTransferred;
DWORD flags; }QSSOverlapped;//for per connection
我下面的server框架的基本思想是:
One connection VS one thread in worker thread pool ,worker thread performs completionWorkerRoutine.
A Acceptor thread 專門用來accept socket,關聯至IOCP,并WSARecv:post Recv Completion Packet to IOCP.
在completionWorkerRoutine中有以下的職責:
1.handle request,當忙時增加completionWorkerThread數量但不超過maxThreads,post Recv Completion Packet to IOCP.
2.timeout時檢查是否空閑和當前completionWorkerThread數量,當空閑時保持或減少至minThreads數量.
3.對所有Accepted-socket管理生命周期,這里利用系統的keepalive probes,若想實現業務層"心跳探測"只需將QSS_SIO_KEEPALIVE_VALS_TIMEOUT 改回系統默認的2小時.
下面結合源代碼,淺析一下IOCP:
socketserver.h
#ifndef __Q_SOCKET_SERVER__
#define __Q_SOCKET_SERVER__
#include <winsock2.h>
#include <mstcpip.h>
#define QSS_SIO_KEEPALIVE_VALS_TIMEOUT 30*60*1000
#define QSS_SIO_KEEPALIVE_VALS_INTERVAL 5*1000
#define MAX_THREADS 100
#define MAX_THREADS_MIN 10
#define MIN_WORKER_WAIT_TIMEOUT 20*1000
#define MAX_WORKER_WAIT_TIMEOUT 60*MIN_WORKER_WAIT_TIMEOUT
#define MAX_BUF_SIZE 1024
/*當Accepted socket和socket關閉或發生異常時回調CSocketLifecycleCallback*/
typedef void (*CSocketLifecycleCallback)(SOCKET cs,int lifecycle);//lifecycle:0:OnAccepted,-1:OnClose//注意OnClose此時的socket未必可用,可能已經被非正常關閉或其他異常.
/*協議處理回調*/
typedef int (*InternalProtocolHandler)(LPWSAOVERLAPPED overlapped);//return -1:SOCKET_ERROR
typedef struct Q_SOCKET_SERVER SocketServer;
DWORD initializeSocketServer(SocketServer ** ssp,WORD passive,WORD port,CSocketLifecycleCallback cslifecb,InternalProtocolHandler protoHandler,WORD minThreads,WORD maxThreads,long workerWaitTimeout);
DWORD startSocketServer(SocketServer *ss);
DWORD shutdownSocketServer(SocketServer *ss);
#endif
qsocketserver.c 簡稱 qss,相應的OVERLAPPED簡稱qssOl.
#include "socketserver.h"
#include "stdio.h"
typedef struct {
WORD passive;//daemon
WORD port;
WORD minThreads;
WORD maxThreads;
volatile long lifecycleStatus;//0-created,1-starting, 2-running,3-stopping,4-exitKeyPosted,5-stopped
long workerWaitTimeout;//wait timeout
CRITICAL_SECTION QSS_LOCK;
volatile long workerCounter;
volatile long currentBusyWorkers;
volatile long CSocketsCounter;//Accepted-socket引用計數
CSocketLifecycleCallback cslifecb;
InternalProtocolHandler protoHandler;
WORD wsaVersion;//=MAKEWORD(2,0);
WSADATA wsData;
SOCKET server_s;
SOCKADDR_IN serv_addr;
HANDLE iocpHandle;
}QSocketServer;
typedef struct {
WSAOVERLAPPED overlapped;
SOCKET client_s;
SOCKADDR_IN client_addr;
WORD optCode;
char buf[MAX_BUF_SIZE];
WSABUF wsaBuf;
DWORD numberOfBytesTransferred;
DWORD flags;
}QSSOverlapped;
DWORD acceptorRoutine(LPVOID);
DWORD completionWorkerRoutine(LPVOID);
static void adjustQSSWorkerLimits(QSocketServer *qss){
/*adjust size and timeout.*/
/*if(qss->maxThreads <= 0) {
qss->maxThreads = MAX_THREADS;
} else if (qss->maxThreads < MAX_THREADS_MIN) {
qss->maxThreads = MAX_THREADS_MIN;
}
if(qss->minThreads > qss->maxThreads) {
qss->minThreads = qss->maxThreads;
}
if(qss->minThreads <= 0) {
if(1 == qss->maxThreads) {
qss->minThreads = 1;
} else {
qss->minThreads = qss->maxThreads/2;
}
}
if(qss->workerWaitTimeout<MIN_WORKER_WAIT_TIMEOUT)
qss->workerWaitTimeout=MIN_WORKER_WAIT_TIMEOUT;
if(qss->workerWaitTimeout>MAX_WORKER_WAIT_TIMEOUT)
qss->workerWaitTimeout=MAX_WORKER_WAIT_TIMEOUT; */
}
typedef struct{
QSocketServer * qss;
HANDLE th;
}QSSWORKER_PARAM;
static WORD addQSSWorker(QSocketServer *qss,WORD addCounter){
WORD res=0;
if(qss->workerCounter<qss->minThreads||(qss->currentBusyWorkers==qss->workerCounter&&qss->workerCounter<qss->maxThreads)){
DWORD threadId;
QSSWORKER_PARAM * pParam=NULL;
int i=0;
EnterCriticalSection(&qss->QSS_LOCK);
if(qss->workerCounter+addCounter<=qss->maxThreads)
for(;i<addCounter;i++)
{
pParam=malloc(sizeof(QSSWORKER_PARAM));
if(pParam){
pParam->th=CreateThread(NULL,0,(LPTHREAD_START_ROUTINE)completionWorkerRoutine,pParam,CREATE_SUSPENDED,&threadId);
pParam->qss=qss;
ResumeThread(pParam->th);
qss->workerCounter++,res++;
}
}
LeaveCriticalSection(&qss->QSS_LOCK);
}
return res;
}
static void SOlogger(const char * msg,SOCKET s,int clearup){
perror(msg);
if(s>0)
closesocket(s);
if(clearup)
WSACleanup();
}
static int _InternalEchoProtocolHandler(LPWSAOVERLAPPED overlapped){
QSSOverlapped *qssOl=(QSSOverlapped *)overlapped;
printf("numOfT:%d,WSARecvd:%s,\n",qssOl->numberOfBytesTransferred,qssOl->buf);
//Sleep(500);
return send(qssOl->client_s,qssOl->buf,qssOl->numberOfBytesTransferred,0);
}
DWORD initializeSocketServer(SocketServer ** ssp,WORD passive,WORD port,CSocketLifecycleCallback cslifecb,InternalProtocolHandler protoHandler,WORD minThreads,WORD maxThreads,long workerWaitTimeout){
QSocketServer * qss=malloc(sizeof(QSocketServer));
qss->passive=passive>0?1:0;
qss->port=port;
qss->minThreads=minThreads;
qss->maxThreads=maxThreads;
qss->workerWaitTimeout=workerWaitTimeout;
qss->wsaVersion=MAKEWORD(2,0);
qss->lifecycleStatus=0;
InitializeCriticalSection(&qss->QSS_LOCK);
qss->workerCounter=0;
qss->currentBusyWorkers=0;
qss->CSocketsCounter=0;
qss->cslifecb=cslifecb,qss->protoHandler=protoHandler;
if(!qss->protoHandler)
qss->protoHandler=_InternalEchoProtocolHandler;
adjustQSSWorkerLimits(qss);
*ssp=(SocketServer *)qss;
return 1;
}
DWORD startSocketServer(SocketServer *ss){
QSocketServer * qss=(QSocketServer *)ss;
if(qss==NULL||InterlockedCompareExchange(&qss->lifecycleStatus,1,0))
return 0;
qss->serv_addr.sin_family=AF_INET;
qss->serv_addr.sin_port=htons(qss->port);
qss->serv_addr.sin_addr.s_addr=INADDR_ANY;//inet_addr("127.0.0.1");
if(WSAStartup(qss->wsaVersion,&qss->wsData)){
/*這里還有個插曲就是這個WSAStartup被調用的時候,它居然會啟動一條額外的線程,當然稍后這條線程會自動退出的.不知WSAClearup又會如何?......*/
SOlogger("WSAStartup failed.\n",0,0);
return 0;
}
qss->server_s=socket(AF_INET,SOCK_STREAM,IPPROTO_IP);
if(qss->server_s==INVALID_SOCKET){
SOlogger("socket failed.\n",0,1);
return 0;
}
if(bind(qss->server_s,(LPSOCKADDR)&qss->serv_addr,sizeof(SOCKADDR_IN))==SOCKET_ERROR){
SOlogger("bind failed.\n",qss->server_s,1);
return 0;
}
if(listen(qss->server_s,SOMAXCONN)==SOCKET_ERROR)/*這里來談?wù)?strong>backlog,很多人不知道設成何值,我見到過1,5,50,100的,有人說設定的越大越耗資源,的確,這里設成SOMAXCONN不代表windows會真的使用SOMAXCONN,而是" If set to SOMAXCONN, the underlying service provider responsible for socket s will set the backlog to a maximum reasonable value. "，同時在現實環境中，不同操作系統支持TCP緩沖隊列有所不同，所以還不如讓操作系統來決定它的值。像Apache這種服務器：
#ifndef DEFAULT_LISTENBACKLOG
#define DEFAULT_LISTENBACKLOG 511
#endif
*/
{
SOlogger("listen failed.\n",qss->server_s,1);
return 0;
}
qss->iocpHandle=CreateIoCompletionPort(INVALID_HANDLE_VALUE,NULL,0,/*NumberOfConcurrentThreads-->*/qss->maxThreads);
//initialize worker for completion routine.
addQSSWorker(qss,qss->minThreads);
qss->lifecycleStatus=2;
{
QSSWORKER_PARAM * pParam=malloc(sizeof(QSSWORKER_PARAM));
pParam->qss=qss;
pParam->th=NULL;
if(qss->passive){
DWORD threadId;
pParam->th=CreateThread(NULL,0,(LPTHREAD_START_ROUTINE)acceptorRoutine,pParam,0,&threadId);
}else
return acceptorRoutine(pParam);
}
return 1;
}
DWORD shutdownSocketServer(SocketServer *ss){
QSocketServer * qss=(QSocketServer *)ss;
if(qss==NULL||InterlockedCompareExchange(&qss->lifecycleStatus,3,2)!=2)
return 0;
closesocket(qss->server_s/*listen-socket*/);//..other accepted-sockets associated with the listen-socket will not be closed,except WSACleanup is called..
if(qss->CSocketsCounter==0)
qss->lifecycleStatus=4,PostQueuedCompletionStatus(qss->iocpHandle,0,-1,NULL);
WSACleanup();
return 1;
}
DWORD acceptorRoutine(LPVOID ss){
QSSWORKER_PARAM * pParam=(QSSWORKER_PARAM *)ss;
QSocketServer * qss=pParam->qss;
HANDLE curThread=pParam->th;
QSSOverlapped *qssOl=NULL;
SOCKADDR_IN client_addr;
int client_addr_leng=sizeof(SOCKADDR_IN);
SOCKET cs;
free(pParam);
while(1){
printf("accept starting.....\n");
cs/*Accepted-socket*/=accept(qss->server_s,(LPSOCKADDR)&client_addr,&client_addr_leng);
if(cs==INVALID_SOCKET)
{
printf("accept failed:%d\n",GetLastError());
break;
}else{//SO_KEEPALIVE,SIO_KEEPALIVE_VALS 這里是利用系統的"心跳探測",keepalive probes.linux:setsockopt,SOL_TCP:TCP_KEEPIDLE,TCP_KEEPINTVL,TCP_KEEPCNT
struct tcp_keepalive alive,aliveOut;
int so_keepalive_opt=1;
DWORD outDW;
if(!setsockopt(cs,SOL_SOCKET,SO_KEEPALIVE,(char *)&so_keepalive_opt,sizeof(so_keepalive_opt))){
alive.onoff=TRUE;
alive.keepalivetime=QSS_SIO_KEEPALIVE_VALS_TIMEOUT;
alive.keepaliveinterval=QSS_SIO_KEEPALIVE_VALS_INTERVAL;
if(WSAIoctl(cs,SIO_KEEPALIVE_VALS,&alive,sizeof(alive),&aliveOut,sizeof(aliveOut),&outDW,NULL,NULL)==SOCKET_ERROR){
printf("WSAIoctl SIO_KEEPALIVE_VALS failed:%d\n",GetLastError());
break;
}
}else{
printf("setsockopt SO_KEEPALIVE failed:%d\n",GetLastError());
break;
}
}
CreateIoCompletionPort((HANDLE)cs,qss->iocpHandle,cs,0);
if(qssOl==NULL){
qssOl=malloc(sizeof(QSSOverlapped));
}
qssOl->client_s=cs;
qssOl->wsaBuf.len=MAX_BUF_SIZE,qssOl->wsaBuf.buf=qssOl->buf,qssOl->numberOfBytesTransferred=0,qssOl->flags=0;//initialize WSABuf.
memset(&qssOl->overlapped,0,sizeof(WSAOVERLAPPED));
{
DWORD lastErr=GetLastError();
int ret=0;
SetLastError(0);
ret=WSARecv(cs,&qssOl->wsaBuf,1,&qssOl->numberOfBytesTransferred,&qssOl->flags,&qssOl->overlapped,NULL);
if(ret==0||(ret==SOCKET_ERROR&&GetLastError()==WSA_IO_PENDING)){
InterlockedIncrement(&qss->CSocketsCounter);//Accepted-socket計數遞增.
if(qss->cslifecb)
qss->cslifecb(cs,0);
qssOl=NULL;
}
if(!GetLastError())
SetLastError(lastErr);
}
printf("accept flags:%d ,cs:%d.\n",GetLastError(),cs);
}//end while.
if(qssOl)
free(qssOl);
if(qss)
shutdownSocketServer((SocketServer *)qss);
if(curThread)
CloseHandle(curThread);
return 1;
}
static int postRecvCompletionPacket(QSSOverlapped * qssOl,int SOErrOccurredCode){
int SOErrOccurred=0;
DWORD lastErr=GetLastError();
SetLastError(0);
//SOCKET_ERROR:-1,WSA_IO_PENDING:997
if(WSARecv(qssOl->client_s,&qssOl->wsaBuf,1,&qssOl->numberOfBytesTransferred,&qssOl->flags,&qssOl->overlapped,NULL)==SOCKET_ERROR
&&GetLastError()!=WSA_IO_PENDING)//this case lastError maybe 64, 10054
{
SOErrOccurred=SOErrOccurredCode;
}
if(!GetLastError())
SetLastError(lastErr);
if(SOErrOccurred)
printf("worker[%d] postRecvCompletionPacket SOErrOccurred=%d,preErr:%d,postedErr:%d\n",GetCurrentThreadId(),SOErrOccurred,lastErr,GetLastError());
return SOErrOccurred;
}
DWORD completionWorkerRoutine(LPVOID ss){
QSSWORKER_PARAM * pParam=(QSSWORKER_PARAM *)ss;
QSocketServer * qss=pParam->qss;
HANDLE curThread=pParam->th;
QSSOverlapped * qssOl=NULL;
DWORD numberOfBytesTransferred=0;
ULONG_PTR completionKey=0;
int postRes=0,handleCode=0,exitCode=0,SOErrOccurred=0;
free(pParam);
while(!exitCode){
SetLastError(0);
if(GetQueuedCompletionStatus(qss->iocpHandle,&numberOfBytesTransferred,&completionKey,(LPOVERLAPPED *)&qssOl,qss->workerWaitTimeout)){
if(completionKey==-1&&qss->lifecycleStatus>=4)
{
printf("worker[%d] completionKey -1:%d \n",GetCurrentThreadId(),GetLastError());
if(qss->workerCounter>1)
PostQueuedCompletionStatus(qss->iocpHandle,0,-1,NULL);
exitCode=1;
break;
}
if(numberOfBytesTransferred>0){
InterlockedIncrement(&qss->currentBusyWorkers);
addQSSWorker(qss,1);
handleCode=qss->protoHandler((LPWSAOVERLAPPED)qssOl);
InterlockedDecrement(&qss->currentBusyWorkers);
if(handleCode>=0){
SOErrOccurred=postRecvCompletionPacket(qssOl,1);
}else
SOErrOccurred=2;
}else{
printf("worker[%d] numberOfBytesTransferred==0 ***** closesocket servS or cs *****,%d,%d ,ol is:%d\n",GetCurrentThreadId(),GetLastError(),completionKey,qssOl==NULL?0:1);
SOErrOccurred=3;
}
}else{ //GetQueuedCompletionStatus rtn FALSE, lastError 64 ,995[timeout worker thread exit.] ,WAIT_TIMEOUT:258
if(qssOl){
SOErrOccurred=postRecvCompletionPacket(qssOl,4);
}else {
printf("worker[%d] GetQueuedCompletionStatus F:%d \n",GetCurrentThreadId(),GetLastError());
if(GetLastError()!=WAIT_TIMEOUT){
exitCode=2;
}else{//wait timeout
if(qss->lifecycleStatus!=4&&qss->currentBusyWorkers==0&&qss->workerCounter>qss->minThreads){
EnterCriticalSection(&qss->QSS_LOCK);
if(qss->lifecycleStatus!=4&&qss->currentBusyWorkers==0&&qss->workerCounter>qss->minThreads){
qss->workerCounter--;//until qss->workerCounter decrease to qss->minThreads
exitCode=3;
}
LeaveCriticalSection(&qss->QSS_LOCK);
}
}
}
}//end GetQueuedCompletionStatus.
if(SOErrOccurred){
if(qss->cslifecb)
qss->cslifecb(qssOl->client_s,-1);
/*if(qssOl)*/{
closesocket(qssOl->client_s);
free(qssOl);
}
if(InterlockedDecrement(&qss->CSocketsCounter)==0&&qss->lifecycleStatus>=3){
//for qss workerSize,PostQueuedCompletionStatus -1
qss->lifecycleStatus=4,PostQueuedCompletionStatus(qss->iocpHandle,0,-1,NULL);
exitCode=4;
}
}
qssOl=NULL,numberOfBytesTransferred=0,completionKey=0,SOErrOccurred=0;//for net while.
}//end while.
//last to do
if(exitCode!=3){
int clearup=0;
EnterCriticalSection(&qss->QSS_LOCK);
if(!--qss->workerCounter&&qss->lifecycleStatus>=4){//clearup QSS
clearup=1;
}
LeaveCriticalSection(&qss->QSS_LOCK);
if(clearup){
DeleteCriticalSection(&qss->QSS_LOCK);
CloseHandle(qss->iocpHandle);
free(qss);
}
}
CloseHandle(curThread);
return 1;
}
------------------------------------------------------------------------------------------------------------------------
對于IOCP的LastError的辨別和處理是個難點,所以請注意我的completionWorkerRoutine的while結構,
結構如下:
while(!exitCode){
if(completionKey==-1){...break;}
if(GetQueuedCompletionStatus){/*在這個if體中只要你投遞的OVERLAPPED is not NULL,那么這里你得到的就是它.*/
if(numberOfBytesTransferred>0){
/*在這里handle request,記得要繼續投遞你的OVERLAPPED哦! */
}else{
/*這里可能客戶端或服務端closesocket(the socket),但是OVERLAPPED is not NULL,只要你投遞的不為NULL!*/
}
}else{/*在這里的if體中,雖然GetQueuedCompletionStatus return FALSE,但是不代表OVERLAPPED一定為NULL.特別是OVERLAPPED is not NULL的情況下,不要以為LastError發生了,就代表當前的socket無用或發生致命的異常,比如發生lastError:995這種情況下此時的socket有可能是一切正常的可用的,你不應該關閉它.*/
if(OVERLAPPED is not NULL){
/*這種情況下,請不管37,21繼續投遞吧!在投遞后再檢測錯誤.*/
}else{
}
}
if(socket error occured){
}
prepare for next while.
}
行文倉促,難免有錯誤或不足之處,希望大家踴躍指正評論,謝謝!
這個模型在性能上還是有改進的空間哦！
from:
http://m.shnenglu.com/adapterofcoms/archive/2010/06/26/118781.aspx
posted on 2010-08-25 20:42
chatler 閱讀(1761)
評論(0) 編輯 收藏 引用 所屬分類:
windows 、
Network 、
Socket