最近遇到了創建連接點的問題(飛信就能自己創建來著)，到網上搜羅了一下解決方法。這里總結一下：
這些方法主要是針對函數DMProcessConfigXML里面的第一個參數來的，函數的具體使用方法參見MSDN。
MSDN沒有對第一個參數做太多解釋，下面提供一些使用實例：
創建cmnet連接
LPCWSTR strFavoriteXml =
L"<wap-provisioningdoc>"
L"<characteristic type=\"CM_GPRSEntries\">"
L"<characteristic type=\"Internet Connect\">"
L"<parm name=\"DestId\" value=\"{436EF144-B4FB-4863-A041-8F905A62C572}\" />"
L"<characteristic type=\"DevSpecificCellular\">"
L"<parm name=\"GPRSInfoAccessPointName\" value=\"cmnet\" />"
L"</characteristic>"
L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>"; //DestID是自己定義的GUID，當然，也有已經定義好的GUID可以直接用
LPWSTR pszwXMLout = NULL;
HRESULT hr = DMProcessConfigXML(strFavoriteXml, CFGFLAG_PROCESS, &pszwXMLout);
if ( pszwXMLout )
{
delete [] pszwXMLout;
pszwXMLout = NULL;
}
創建cmwap連接
CString strFavoriteXml =
L"<wap-provisioningdoc>"
L"<characteristic type=\"CM_Networks\">"
L"<characteristic type=\"Test_GPRS\">"
L"<parm name=\"DestId\" value=\"{D1D06580-C364-55ec-9421-6ACF34129C58}\" />"
L"</characteristic>"
L"</characteristic>"
L"<characteristic type=\"CM_GPRSEntries\">"
L"<characteristic type=\"Test_GPRS\">"
L"<parm name=\"DestId\" value=\"{D1D06580-C364-55ec-9421-6ACF34129C58}\" />"
L"<characteristic type=\"DevSpecificCellular\">"
L"<parm name=\"BearerInfoValid\" value=\"1\" />"
L"<parm name=\"GPRSInfoValid\" value=\"1\" />"
L"<parm name=\"GPRSInfoProtocolType\" value=\"2\" />"
L"<parm name=\"GPRSInfoL2ProtocolType\" value=\"PPP\" />"
L"<parm name=\"GPRSInfoAccessPointName\" value=\"cmwap\" />"
L"<parm name=\"GPRSInfoAddress\" value=\"\" />"
L"<parm name=\"GPRSInfoDataCompression\" value=\"1\" />"
L"<parm name=\"GPRSInfoHeaderCompression\" value=\"1\" />"
L"<parm name=\"GPRSInfoParameters\" value=\"\" />"
L"</characteristic>"
L"</characteristic>"
L"</characteristic>"
L"<characteristic type=\"CM_ProxyEntries\">"
L"<characteristic type=\"WAP\">"
L"<parm name=\"SrcId\" value=\"{D1D06580-C364-55ec-9421-6ACF34129C58}\" />"
L"<parm name=\"DestId\" value=\"{436EF144-B4FB-4863-A041-8F905A62C572}\" />"
L"<parm name=\"Proxy\" value=\"10.0.0.172:80\" />"
L"<parm name=\"Enable\" value=\"1\" />"
L"<parm name=\"Type\" value=\"1\" />"
L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>";
LPWSTR pszwXMLout = NULL;
HRESULT hr = DMProcessConfigXML(strFavoriteXml, CFGFLAG_PROCESS, &pszwXMLout);
if ( pszwXMLout )
{
delete [] pszwXMLout;
pszwXMLout = NULL;
}
獲取某個連接的接入點
LPCTSTR szFormat =
L"<wap-provisioningdoc>"
L"<characteristic type=\"CM_GPRSEntries\">"
L"<characteristic type=\"%s\">"
L"<characteristic type=\"DevSpecificCellular\">"
L"<parm-query name=\"GPRSInfoAccessPointName\"/>"
L"</characteristic>"
L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>";
//%s為 "移動夢網(GPRS)" "GPRS連接互聯網" 等，
//可以用ConnMgrQueryDetailedStatus枚舉，CONNMGR_CONNECTION_DETAILED_STATUS的szDescription
卸載應用程序
LPCTSTR szFormat =
L"<wap-provisioningdoc>"
L"<characteristic type="UnInstall">"
L"<characteristic type="[AppName]">"
L"<parm name="uninstall" value="1"/>"
L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>"
//[AppName] = 注冊表中對應的該軟件的名稱 一般是：生成cab包使用的inf中的provider和appname的組合
//如：provider = aaa appname = bbb <characteristic type="aaa bbb"> 然后用DMProcessConfigXML來處理
關閉硬件按鈕聲音
LPCTSTR szFormat =
L"<wap-provisioningdoc>"
L"<characteristic type="Sounds">"
L"<characteristic type="ControlPanel\Sounds\KeyPress">"
L"<parm name="Mode" value="1"/> <!-- 0=none, 1=tone, 2=click -->"
L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>"
//使用DMProcessConfigXML()函數通過配置管理器發送上面的XML配置數據。
創建一封新的email
LPCWSTR strFavoriteXml =
L"<wap-provisioningdoc>"
L"<characteristic type="EMAIL2">"
L"<characteristic type="[GUID]">"
L"<parm name="SERVICENAME" value="[MailServiceName]"/>"
L"<parm name="SERVICETYPE" value="POP3"/>"
L"<parm name="INSERVER" value="[popserver]"/>"
L"<parm name="OUTSERVER" value="[smtpserver]"/>"
L"<parm name="AUTHNAME" value="[alias]"/>"
L"<parm name="AUTHSECRET" value="[password]"/>"
L"<parm name="DOMAIN" value="[domain]"/>"
L"<parm name="REPLYADDR" value="[emailAddress]"/>"
L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>"
//[
]中的參數都是自定義的
創建Wi-Fi連接
//This XML will add or overwrite a Wi-Fi access point connection with SSID COWO, no encryption, open authentication.
//This connection is regarded as an internet connection.
LPCWSTR in = \
L"<wap-provisioningdoc>"
L" <characteristic type=\"Wi-Fi\"> "
L" <characteristic type=\"access-point\"> "
L" <characteristic type=\"COWO\"> "
L" <parm name=\"DestId\" value=\"{436EF144-B4FB-4863-A041-8F905A62C572}\"/>"
L" <parm name=\"AdHoc\" value=\"0\"/>"
L" <parm name=\"Authentication\" value=\"0\"/>"
L" <parm name=\"Encryption\" value=\"1\"/>"
L" <parm name=\"KeyProvided\" value=\"0\"/>"
L" <parm name=\"NetworkKey\" value=\"\"/>"
L" <parm name=\"KeyIndex\" value=\"1\"/>"
L" <parm name=\"Use8021x\" value=\"0\"/>"
L" <parm name=\"EAPType\" value=\"25\"/>"
L" </characteristic>"
L" </characteristic>"
L" </characteristic>"
L"</wap-provisioningdoc>";
枚舉Wi-Fi連接點
//There are some M$ examples about recursive query of all WiFi connections.
//Here's an example on how to query a specific connection.
LPCWSTR in =
L"<wap-provisioningdoc>"
L" <characteristic type=\"Wi-Fi\"> "
L" <characteristic type=\"access-point\"> "
L" <characteristic-query type=\"COWO\" /> "
L" </characteristic>"
L" </characteristic>"
L"</wap-provisioningdoc>";
參考連接：
http://blog.csdn.net/caicaileowince/archive/2008/07/01/2601456.aspx
http://cowo.supersized.org/archives/14-Example-usage-of-DMProcessConfigXML-on-WinCE-5.0.html
來自小李匪盜的連接：
http://blog.csdn.net/pknife/archive/2008/05/21/2467602.aspx
http://blog.csdn.net/pknife/archive/2008/05/22/2469126.aspx
http://blog.csdn.net/pknife/archive/2008/11/07/3248315.aspx
posted on 2009-04-21 16:50
Sandy 閱讀(1234)
評論(0) 編輯 收藏 引用 所屬分類:
Window Mobile